Label printers "MT" with centered material guidance and a separator

See also:

Play

Video: Label printer SQUIX

for industrial applications

  View video

Label printer SQUIX 4 MT
providing a built-on separator

Technical details

Differences compared to a left-aligned material guide

1 Ribbon holder
A preprinted ruller simplifies setting a ribbon.

2 Plungers
Both positions remain fixed with all widths of material. There is no need of adjustment on the print head.

3 Antistatic brush
to dissipate electrostatic charge after printing, in particular if plastic materials are in use

4 Separator
In applications requiring high heat energies, a ribbon may stick with the textile tape after printing. A draw roller reliably separates the ribbon from the material.

5 Roll holder
By applying the margin stop, a roll centers automatically

6 Material guide
attached next to the print roller to ensure accurate print images. Material widths are set with the help of a spindle

7 Slim print rollers
to obtain accurate print images if small materials and ribbons are in use. They prevent from roller wear, print head contamination and errors while materials are fed.

Synthetic rubber coating

Operation panel

Self-explanatory symbols help with the device settings and enable a printer to be operated intuitive and easily.

1 LED: Power ON

2 Status bar: reception of data, record data stream, pre-warning to a ribbon ending, SD memory card / USB memory stick plugged, Bluetooth, WLAN, Ethernet, USB slave, time

3 Printer status: ready, pause, number of labels printed in a print job, label in peel-off position, external start signal awaited

4 USB port to plug a service key or a memory stick, to transfer data to the IFFS memory

5 USB WLAN stick 2.4 GHz 802.11b/g/n enclosed in the scope of delivery; In hotspot mode, mobile devices can connect directly to a printer via WLAN.

6 Operation

Cutter / perforation cutter: cutting
External rewinder: wound outside or inside
Tear-off or peel-off mode:printing a label
Applicator: printing and labeling in individual steps

vergrößern
Setup options

vergrößern
Printing parameters

vergrößern
Print position Y

vergrößern
Print speed selection

vergrößern
Video tutorials

External operation panel

same functionality as on the printer

display in landscape or portrait mode

Users are free to choose whether to operate the external panel or the one installed on the printer.

USB 2.0 Hi-Speed device to connect a printer

1 LED: Power ON

2 USB port to plug a service key or a memory stick, to transfer data to the IFFS memory

3 Connecting USB cable, lengths 1.8 m to 16 m If length succeeds 3 m, use only specified cables. For dimensions see assembly instructions

Print heads

Maintenance

ONE tool
is provided ready on a device to replace all the components and assemble periphery.

Technical data SQUIX  with SQUIX M and SQUIX MP by comparison (PDF)

Typical    Possible   Standard     Option

	1.5
Label printer	SQUIX 4.3 MT	SQUIX 4 MT
Material feed	centered
Printing method: Thermal transfer
Printing method: Thermal direct			-
Printable resolution dpi	300	300	600
Print speed up to mm/s	250	300	150
Print width up to mm	108.4	105.7	105.7
Start of printing Distance to locating edge mm	centered
Material1)
Paper, cardboard, plastics PET, PE, PP, PI, PVC, PU, acrylate, Tyvec
Shrink tubes ready-for-use
Shrink tubes continuous,pressed
Textile tapes
Packing on rolls, fanfold
Packing on reels
Packing Roll diameter up to mm	205
Packing Core diameter mm	38.1 - 76
Packing Winding	outside or inside
Labels Width mm	4 - 110
Labels Height excl. label backfeed2) from mm	4
Labels Height incl. label backfeed2) from mm	6
Labels Thickness mm	0.03 - 0.6
Liner material Width mm	9  - 114
Liner material Thickness mm	0.03 - 0.16
Continuous material Width mm	9  - 114
Continuous material Thickness mm	0.05 - 0.5
Continuous material Weight (cardboard) up to g/m2	300
Shrink tubes Width ready-for-use up to mm	114
Shrink tubes Width continuous, pressed mm	4 - 85
Shrink tubes Thickness up to mm	1.1
Ribbon3) Ink side	outside or inside
Ribbon   Roll diameter up to mm	90
Ribbon   Core diameter mm	25.4
Ribbon   Variable length up to m	600
Ribbon   Width mm	25 - 114
Printer sizes and weights
Width x Height x Depth mm	252 x 288 x 460
Weight kg	10
Label sensor indicating the position
Gap sensor for	labels or punch marks and end of material, print marks on transparant materials
Reflective sensor reflex from below or top for	labels and end of material, print marks on non-transparent materials
Distance of sensor from centre to locating edge centered mm	0 - 55
Material passage up to mm	2
Electronics
Processor 32 bit clock rate	800
Main storage (RAM) MB	256
Data storage (IFFS) MB	50
Slot for SD memory card (SDHC, SDXC) up to GB	512
Battery for time and date, real-time clock
Data memory when power is switched off (e.g. serial numbering)
Interfaces
RS232C 1,200 to 230,400 baud/8 bit
USB 2.0 Hi-speed device to connect a PC
Ethernet 10/100 Mbit/s	LPD, RawIP printing, SOAP webservice, OPC UA, WebDAV, DHCP, HTTP/HTTPS, FTP/FTPS, TIME, NTP, Zeroconf, SNMP, SMTP, VNC
1 x USB host at the operation panel for	Service Key or USB memory stick
1 x USB host at the operation panel for	USB WLAN stick 2.4 GHz 802.11b/g/n
2 x USB host on the back side for	Service Key, USB memory stick, keyboard, barcode scanner, USB Bluetooth adapter, USB WLAN stick, external operation panel
USB WLAN stick 2.4 GHz 802.11b/g/n	hotspot mode or infrastructure mode  (enclosed in the scope of delivery)
USB WLAN stick 2.4 GHz 802.11b/g/n + 5 GHz 802.11a/n/ac, rod antenna	hotspot mode or infrastructure mode
USB Bluetooth adapter
Peripheral connection USB host, 24 VDC
Digital I/O interface with 8 inputs and outputs Peel-off device
Digital I/O interface with 8 inputs and outputs Basic device
Operating data
Power supply	100 - 240 VAC, 50/60 Hz, PFC
Power consumption	Standby < 10 W / typical 100 W
Temperature / humidity: Operation	+5 - 40°C / 10 - 85% not condensing
Temperature / humidity: Stock	0 - 60°C / 20 - 85% not condensing
Temperature / humidity: Transport	–25 - 60°C / 20 - 85% not condensing
Approvals	CE, FCC Class A, ICES-3, cULus, CB, CoC Mexico, CCC, EAC, BIS, BSMI, KC-Mark

 

Technical data SQUIX  with SQUIX M and SQUIX MP by comparison (PDF)

1. The material specifications are standard values. Applications with small labels, thin, slim, thick and stiff materials as well as strongly adherent labels have to be tested.
2. in cases of tearing off, cutting, rewinding
3. The ribbon should at least correspond with the width of the liner material.

An overview of which accessories are compatible with which device version and which accessories can be adopted from the A + series you can find in the product brochure.

Video: Label printers SQUIX - designed for industrial application

Powered by YouTube. See all cab videos: cab Channel auf YouTube.
 

Other formats: Label printer SQUIX - designed for industrial application (MPEG-4; 218 MB)

cab Video Tutorials SQUIX

Play

SQUIX 4 MT: Loading labels

Play

SQUIX: Loading  leporello

Play

SQUIX 4 MT: Loading ribbon

Play

SQUIX: Cleaning printhead

Play

SQUIX: Cleaning print roller   

Play

SQUIX: Changing print roller   

Play

SQUIX: Install WLAN stick

 

 

Registration is required

Please fill in the following form and ensure that you use correct email address.

You will receive an email with a confirmation link.

First name *

Last name *

email address *

cab Produkttechnik GmbH & Co KG (hereafter "cab") or its affiliated companies hereby grants you a non-exclusive, nontransferable license at no charge to use these 3-D models and the corresponding documentation according to the following terms: LICENSE GRANT - You may - install the 3-D models on your personal computers; - use and transmit the 3-D models on a network within a site; - make copies of the 3-D models in machine readable form for backup purposes; - modify the 3-D models in connection with your projects - pass on the models to third parties in connection with your projects LICENSE RESTRICTIONS - You may not: - rent, sell, transfer or grant any rights in the 3-D models or corresponding documentation without the prior, explicit written consent of cab; - remove any proprietary notices, labels, or marks on the 3-D models and corresponding documentation; - make accessible to the public - market the 3-D models as part of a product or service NATURE OF THIS AGREEMENT - This license is not a sale. Provided that you pay license fees they are in consideration of the licenses granted under this Agreement. Title and copyrights to the 3-D models, corresponding documentation, and any copy made by you, remain the property of cab or its suppliers. Failure to comply with the above restrictions shall automatically terminate this license without further notice and terminate your rights to use the 3-D models and cab shall, in addition to its other legal remedies, be entitled to its reasonable attorney fees. LIMITED WARRANTY - The 3-D models were compiled with great care and checked for accuracy. However cab can not guarantee that all data is up to date, correct and complete. Short-term technical changes are possible at any time. CAD software should only be used by trained staff. It is not a substitute for specialized testing and assessment. cab is not responsible for results on basis of these 3-D models. cab's entire liability and your exclusive remedy under this warranty will be, at the option of cab, to attempt to correct or help you around errors, to replace the 3-D models with functionally equivalent 3-D models, or to terminate this Agreement. EXCEPT FOR THE ABOVE EXPRESS LIMITED WARRANTY, CAB MAKES AND YOU RECEIVE NO WARRANTIES, EXPLICIT, IMPLIED, STATUTORY OR IN ANY COMMUNICATION WITH YOU, AND CAB SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. CAB DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE UNINTERRUPTED OR ERROR FREE. Some states do not allow the exclusion of implied warranties so the above exclusions may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state. LIMITATION OF LIABILITY - IN NO EVENT WILL CAB BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, WHILE LOADING THESE 3-D MODELS OR OTHERWISE, LOST PROFITS, COST OF COVER OR OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING FROM THE USE OF THE 3-D MODELS OR CORRESPONDING DOCUMENTATION, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY. THIS LIMITATION WILL APPLY EVEN IF CAB HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Some states do not allow the limitation or exclusion of liability for incidental, or consequential damages, so the above limitation may not apply to you. If this agreement is translated into any other language than German, the German version remains the authoritative version. If any of the afore mentioned provisions should be or become ineffective, this does not affect the validity of the remaining provisions. The ineffective or invalid provision shall be replaced by the corresponding statutory ruling, unless the parties reach legally effective agreement on another solution. The same also applies to any loopholes in the contract. Accept license

Register

3D CAD models

The files are provided in STEP format, which requires CAD software. Follow this link to download a free STP Viewer:  
 VariCAD Viewer (External website). For downloading the CAD models you need to register. cab will handle your personal information as described in our Privacy statement. This information will not be accessible to any third party for marketing purposes. This category is under construction, more models to follow.

You need Adobe Reader to view the PDF-files.      Download current version of Adobe Reader

Here you can download firmware, drivers and software. Documentation on label software, printers programming and administration as well as integration of cab printers into SAP systems:
 Label software

You need Adobe Reader to view the PDF-files.      Download current version of Adobe Reader