HQ 4614 stroke blow applicators for linerless

Labels are applied in real time from all sides onto packages of various heights in motion

The pad locates in front of the peel-off plate. Printed labels are taken over. A sensor triggers the stroke cylinder direct the pad to a target spot approximately 10 mm above a package. The length of the stroke cylinder defines how far packages may differ in heights.

Application example

Accessories

5.13 Blow tube
5.14 Unit to regulate compressed air

Stroke blow applicator	HQ 4614 L/R-200	HQ 4614 L/R-300	HQ 4614 L/R-400
Distance of a package to the bottom of the unitmm max.	140	240	340
Package heightvariable
Direction from which labels are applied	from the top, from below, from the side
State of a package at theat rest moment a label is applied in motion

Weight of applicatorpackaging excluded kg	not specified	5.5	6.5
Consumption of powerW max.	15
Compressed air bar	4.5
Cycle rate¹⁾ labels/min approx.	25

calculated using a stroke of 100 mm below the unit, labels 100 mm high, a print speed of 100 mm/s

Blow-on pad
Labels are blown onto the surfaces of packages by a blast of air, bridging a distance of 5 mm to 10 mm.

Blow-on pad

Blow-on pad	4614L/R-2100 W x H
Label width HQ 4614mm	20 - 114
Label height HQ 4614 mm	20 - 100

Play

Video: Hermes+ with stroke blow applicator 4614

Real-time labeling of packaging differing in height and being in motion

Watch video

Want to learn more?

HQ 4614 stroke blow applicator for linerless

Ask for an offer free of charge and without obligation:

Request a quote

Learn more:

Read the product brochure (PDF)

expand all collapse all

Accessories for applicators
- Blow tube
  
  to provide support air. To assist label transfer, the label is blown from below to the pad.
  
  Provided for 2", 4" or 6" label applications
- Unit to regulate compressed air
  
  4.5 bar default setting
  
  Provided in a left-hand or right-hand design
  
  Delivery includes a fine filter, a pressure control valve with a display, a hose to connect to an applicator's compressed air input and material to assemble the unit to a chassis or bracket.
- How to assemble a compressed air regulation unit
  
  1 Chassis assembly
  
  2 Bracket assembly