HQ 3014, HQ 3016 front side applicators for linerless

Labels are applied in real time preferably from the top or from the side onto the front or back of packages in motion

The pad locates in front of the peel-off plate. Printed labels are taken over and set onto packages by a rotary cylinder. A sensor detects each package and triggers the pivot arm / pad to its initial position.

Application example

1 Pivot arm length

2 Pivot angles 0 - 90°

Accessories

5.13 Blow tube

5.14 Unit to regulate compressed air

Front side applicators	HQ 3014 L/R-200	HQ 3014 L/R-300	HQ 3014 L/R-400	HQ 3014 L/R-600	HQ 3016 L/R-200	HQ 3016 L/R-300	HQ 3016 L/R-400	HQ 3016 L/R-600
State of a package at rest in motionat the moment a label is applied

Direction from which labels are applied	from the top, from the side, from the front, from the back
Package heightvariable
Pivot arm length¹⁾mm	200	300	400	600	200	300	400	600
Pivot angle	0 - 90°
Weight of applicator packaging excluded kg	9	9.5	10.5	11.5	9.5	10	11	12
Consumption of powerW max.	15
Compressed air bar	4.5
Cycle rate²⁾ labels/min approx.	15

Pivot arm length defines the targeted spot of a label (lower margin) set 90° below a HERMES QL footprint.
calculated using a pivot arm 200 mm long, labels 100 mm high, a print speed of 100 mm/ s

Tamp-on pad
Labels are precisely tamped onto plane, even recessed, surfaces.

Tamp-on pad, spring-mounted
Labels are applied onto surfaces inclined as much as 15° using a spring-mounted vacuum plate. Height within a label area may vary by 10 mm.

Blow-on pad
Labels are blown onto the surfaces of packages by a blast of air, bridging a distance of 5 mm to 10 mm.

Transfer module	3014, 3016 L/R 1100 B x H	3014, 3016 L/R 3100 B x H	3014 L/R 2100 B x H
	Tamp-on pad	Tamp-on pad, spring-mounted	Blow-on pad
Label width HQ 3014 mm	25 - 114	80 - 114	25 - 114
Label width HQ 3016mm	25 - 174	80 - 174	-
Label height HQ 3014mm	8 - 250	80 - 250	10 - 100
Label height HQ 3014mm	25 - 250	80 - 250	25 - 100

Want to learn more?

Front side applicator HQ 3014

Ask for an offer free of charge and without obligation:

Request a quote

Learn more:

Read the product brochure (PDF)

expand all collapse all

Accessories for applicators
- Blow tube
  
  to provide support air. To assist label transfer, the label is blown from below to the pad.
  
  Provided for 2", 4" or 6" label applications
- Unit to regulate compressed air
  
  4.5 bar default setting
  
  Provided in a left-hand or right-hand design
  
  Delivery includes a fine filter, a pressure control valve with a display, a hose to connect to an applicator's compressed air input and material to assemble the unit to a chassis or bracket.
- How to assemble a compressed air regulation unit
  
  1 Chassis assembly
  
  2 Bracket assembly