Flexing of the magazine walls under loading
When the PCB Magazine is correctly assembled, each side wall may flex less than 1,0 mm, to ensure a secure mounting of the PCB. The measurements were using 16 circuit boards, with a clearance of 20 mm between each other, and a weight per board of 500 g. Upon request, a copy of the test report is available.
Critical loading can occur as follows:
- When the magazine is laid on its side on a flat surface, and then lifted.
- When being transported in the vertical position, and the position is changed to the horizontal.
Surface resistance: nach DIN EN 61340-5-1 < 109
Dimensions (Serie 100 / 180 / 300)
Slot width mm: 2,8 / 4,0 / 3,5
Slot depth mm: 2,0 / 2,5 / 2,5
Ammount: 32 / 32 / 32
Distance of PCBs mm: 10 / 10 / 10
Flexing with a total load of 8 kg (Serie 100 / 180 / 300)
Temperature 23°C not reinforced: 1,0 / 0,8 / 0,4
Temperature 23°C with reinforced: 0,5 / 0,4 / -
Temperature 70°C not reinforced: - / - / 0,8
Temperature 70°C with reinforced: 0,9 / 0,7 / -