PCB Separator MAESTRO 6
Separating pre-scored PCBs up to 1,500 mm in length with a minimum of stress

Separation of milled PCBs up to a length of 1,500 mm with a minimum of stress on the components

The MAESTRO 6 is the consequent further development of the proven cab PCB separators. Even very lengthy PCBs can be separated fast, economical and without stress.

The carriage power unit is assembled behind the linear blade. This crucially simplifies the separation and removal of the PCBs.

Dial gauge
In order to separate without stress and to achieve a long service life, the circular and linear blades have to be guided along the entire separation. The dial gauge setting and regularly checking the parallelism is assembled to the carriage.

MAESTRO 6/X03

Separation of FR4, CEM3 and aluminum PCBs up to lengths of 1,500 mm

Simple and quick change of FR4/CEM3 blades to aluminum blades or the other way round

Height of circular blades to the linear blade to be set individually

MAESTRO 6/X01

Separation of FR4 and CEM3 PCBs up to lengths of 900 mm; further lengths on request

MAESTRO 6/601.70

Separation of FR4 and CEM3 PCBs up to lengths of 600 mm and component heights of 70 mm; further lengths on request

Want to learn more?

PCB separator MAESTRO 6

Ask for an offer free of charge and without obligation:

Request a quote

Learn more:

Read the product brochure (PDF)

Overall technical data
Separation method	Component side Circular blade Solder side Linear blade
Operation	path-optimized
Separation speed	up to 500 mm/s up to 250 mm/s with aluminum
Support table depth	160 mm
Operation panel
Control buttons	- Home / Position - Carriage moving to and fro
Programming buttons	- Carriage start / stop position - Carriage moving to and fro with or without interruption - Separation speed - "Number of cuts" or "Separation length" selection - Deletion of selection - Conveyor belt activation - Belt speed
Power switcher	ON / OFF
Foot switch	START separation
Safety switch	E-stop
Power supply	100 - 240 VAC, 50/60 Hz
Emmission sound pressure level	LpA <70 dB (A)
Temperature / humidity: Operation Temperature / humidity: Stock Temperature / humidity: Transport	+5 - 40° C / 10-85 % not condensing 0 - 60° C / 20-80 % not condensing - 25 - 60° C / 20-80 % not condensing
Approvals	CE, FCC Class A

Outside dimensions increased after separation: typically 0.2 mm The milled groove may be interrupted by cutouts.
Protruding components need a recessed linear blade. Contact us, if required