cab 专业的工业条码打印机适用于各种应用领域

A2+, A4+ 及 A6+ 已停產。請參考我們的後續機種 SQUIX 2, SQUIX 4 及 SQUIX 6。

放大图片

超宽幅机种

适用于栈板标签或是圆桶标签

1.4 条码打印机	A8+
打印分辨率 dpi	300
最大打印宽度 mm	216
最快打印速度 mm/s	150

A+ 系列视频

播放视频

A+ 系列 - 工业型条码打印机

播放视频

A+ 系列 搭配 贴标手臂 A1000

A8+

1 超大图形显示面板
白底背光面板可清楚显示条码打印机状态及功能选单操作。

2 碳带供应轴及回收轴
轴心三片旋紧式设计，碳带装卸更方便快速。

3 简易调校不同打印宽度
印字头由左右两支立柱加压控制打印质量，左端立柱固定于内侧、右端立柱固定于标签边缘，可调整右端以符合标签宽度。

4 外围配件端口
透过前方面板的 USB 接口，可快速简易地安装模块化配件，譬如裁刀、外挂回卷器、剥离传感器及贴标手臂等。所有外围配件皆以螺丝固定于 2 个卡榫上来连接至条码打印机。

5 坚固底座机构
一体成型铸铝打造，条码打印机所有各部件皆稳固组装于支架底座上。

6 纸卷架
适用于大于 38 mm 的纸管直径( 76 mm 以上的直径可使用纸卷转接头，能使进纸更平稳)。加装弹簧的边缘档板能确保进纸的持续平稳以达成更高的打印清晰度。

A2+, A4+ 及 A6+ 已停产。请参考我们的后续机种 SQUIX 2, SQUIX 4, SQUIX 6。

 A+ 与 X 系列资料规格比较 (PDF)

标准品     选配品	1.1
条码打印机	A8+
打印头
出纸方向	靠左
打印方式 热转印
打印方式 热感印
打印分辨率 dpi	300
最快打印速度 mm/s	150
最大打印宽度 mm	216
标签
纸卷式：纸张、吊牌纸卡、塑料材质如 纸卷式：PET, PE, PP, PI, PVC, PU, acrylate, Tyvec
标签 宽度 mm1)	46 - 220
标签 高度 mm	20 - 2,000
标签 厚度 mm	0.05 - 0.2
标签底纸 宽度 mm	50 - 235
连续性纸张 宽度 mm	50 - 235
连续性纸张 最大重量 ( 厚纸卡 ) g/m2	300
纸卷 最大外径 mm	205
纸卷 纸管直径 mm	38 - 100
纸卷 回卷方向	外卷 或 内卷
碳带2)
碳墨	外碳 或 内碳
碳带最大直径 mm	72
纸管直径 mm	25
碳带最大长度 m	360
碳带最大宽度 mm	220
条码打印机尺寸及重量
宽度 x 高度 x 深度 mm	352 x 274 x 446
重量 kg	15
标签感应器搭配定位指示器
穿透式感应器	标签前缘、透明标签纸上的打孔标记或黑线标记 及 标签后缘
反射式感应器 标准式 或 反向式	不透明标签纸上的黑线标记 及 标签后缘
感应器距离 到标签边缘 mm	5 - 53
电子零件
32 位元处理器时脉 MHz	266
主记忆体 RAM MB	64
内建快闪记忆体 IFFS MB Flash	8
插槽 CF I 型记忆卡专用
插槽 WLAN 无线网卡专用
微型备用电池
错误时的警示讯号
传输接口
串口 RS232C
USB 2.0 Slave PC 专用高速连接埠
以太网络 10/100 Mbit/s	LPD, RawIP-Printing, FTP, DHCP, HTTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP
串口 RS422/RS485
周边配件连接埠
WLAN 无线网络 802.11b/g, WEP/WPA-PSK (TKIP)
2 组 USB Host	连接金钥、U 盘、键盘、条码扫描枪、外接式操作面板
操作环境
使用电压	100 - 240 VAC ~ 50/60 Hz, PFC
耗电量	100 - 300 W, 视机型而定
温度 / 湿度 操作过程	5 - 40°C / 10 - 85% 非凝结状态
温度 / 湿度 封存状态	0 - 60°C / 20 - 80% 非凝结状态
温度 / 湿度 运送途中	– 25 - 60°C / 20 - 80% 非凝结状态
安全认证	CE, FCC, CB, cULus, CCC

 

 更多的规格资料请参见产品目录 (PDF)

1. 较小、较薄的材质或黏性强的标签可能会有所限制。应先提供给 cab 为您进行测试。
2. 碳带应与标签底纸宽度相对应以避免产生皱折。

A2+, A4+ 及 A6+ 已停產。請參考我們的後續機種 SQUIX 2, SQUIX 4 及 SQUIX 6。

A+ 系列视频

播放视频

A+ 系列 - 工业型条码打印机

播放视频

A+ 系列 搭配 贴标手臂 A1000

cab 视频 A+ 系列导览

播放

A+ 系列 - 清洁打印头

播放

A4+ 条码打印机 更换打印头（英文）

播放

A+ 系列 - 更换打印滚轴

 

播放

A+ 系列 - 安装外卷式标签纸卷

播放

A+ 系列 - 安装内卷式标签纸卷

播放

A+ 系列 - 安装热转印碳带（外碳）

播放

A+ 系列 - 安装热转印碳带（内碳）

下载播放软件：

• For WMV: Windows Media Player
• For MPEG-4: VLC Player

A2+, A4+ 及 A6+ 已停產。請參考我們的後續機種 SQUIX 2, SQUIX 4 及 SQUIX 6。

注册是必要的

请先填写以下表格及正确的EMAIL信箱

您将会收到EMAIL通知，其中提供了下载的连结。

名字 *

姓氏 *

電子郵件 *

cab Produkttechnik GmbH & Co KG (hereafter "cab") or its affiliated companies hereby grants you a non-exclusive, nontransferable license at no charge to use these 3-D models and the corresponding documentation according to the following terms: LICENSE GRANT - You may - install the 3-D models on your personal computers; - use and transmit the 3-D models on a network within a site; - make copies of the 3-D models in machine readable form for backup purposes; - modify the 3-D models in connection with your projects - pass on the models to third parties in connection with your projects LICENSE RESTRICTIONS - You may not: - rent, sell, transfer or grant any rights in the 3-D models or corresponding documentation without the prior, explicit written consent of cab; - remove any proprietary notices, labels, or marks on the 3-D models and corresponding documentation; - make accessible to the public - market the 3-D models as part of a product or service NATURE OF THIS AGREEMENT - This license is not a sale. Provided that you pay license fees they are in consideration of the licenses granted under this Agreement. Title and copyrights to the 3-D models, corresponding documentation, and any copy made by you, remain the property of cab or its suppliers. Failure to comply with the above restrictions shall automatically terminate this license without further notice and terminate your rights to use the 3-D models and cab shall, in addition to its other legal remedies, be entitled to its reasonable attorney fees. LIMITED WARRANTY - The 3-D models were compiled with great care and checked for accuracy. However cab can not guarantee that all data is up to date, correct and complete. Short-term technical changes are possible at any time. CAD software should only be used by trained staff. It is not a substitute for specialized testing and assessment. cab is not responsible for results on basis of these 3-D models. cab's entire liability and your exclusive remedy under this warranty will be, at the option of cab, to attempt to correct or help you around errors, to replace the 3-D models with functionally equivalent 3-D models, or to terminate this Agreement. EXCEPT FOR THE ABOVE EXPRESS LIMITED WARRANTY, CAB MAKES AND YOU RECEIVE NO WARRANTIES, EXPLICIT, IMPLIED, STATUTORY OR IN ANY COMMUNICATION WITH YOU, AND CAB SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. CAB DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE UNINTERRUPTED OR ERROR FREE. Some states do not allow the exclusion of implied warranties so the above exclusions may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state. LIMITATION OF LIABILITY - IN NO EVENT WILL CAB BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, WHILE LOADING THESE 3-D MODELS OR OTHERWISE, LOST PROFITS, COST OF COVER OR OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING FROM THE USE OF THE 3-D MODELS OR CORRESPONDING DOCUMENTATION, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY. THIS LIMITATION WILL APPLY EVEN IF CAB HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Some states do not allow the limitation or exclusion of liability for incidental, or consequential damages, so the above limitation may not apply to you. If this agreement is translated into any other language than German, the German version remains the authoritative version. If any of the afore mentioned provisions should be or become ineffective, this does not affect the validity of the remaining provisions. The ineffective or invalid provision shall be replaced by the corresponding statutory ruling, unless the parties reach legally effective agreement on another solution. The same also applies to any loopholes in the contract. Accept license

继续 (in English)

3D CAD模型

此档案是以STEP格式提供， 所以必须是以CAD软件开启。 下载免费检视软件STP viewer请点击  VariCAD Viewer (外部网站)。

请选择您要的模型并点击链接。填写出现的表格完成注册程序。cab会根据隐私使用条款建立您的个人资料。 您的个人资料将不会移转给第三人作为其他用途使用。 您会收到一封附带激活链接的电子邮件，点击链接便可以下载模型。

读取PDF档案前请先下载Adobe® Reader®软件。       请于此点击下载Adobe Reader

读取PDF档案前请先下载Adobe® Reader®软件。       请于此点击下载Adobe Reader