For full functionality of this site it is necessary to enable JavaScript.

라벨 프린터 XC Q
2색 인쇄를 위한

최대 인쇄 속도는 200mm/s이며, 프린트 해상도는 300dpi입니다.

각 프린트 헤드는 개별적인 온도 조절이 가능합니다. 인쇄는 프린트 헤드 2로만 가능하며, 프린트 헤드 1은 메뉴에서 비활성화할 수 있습니다.

인쇄 이미지는 백피드 없이 커팅하거나 천공할 때 연속적으로 유지됩니다. 다중 인쇄 작업을 레이블 손실 없이 매끄럽게 진행할 수 있습니다.

XC Q4

XC Q6

Standard 스탠다드 Option 옵션

라벨 프린터	XC Q4	XC Q6
프린트 헤드
프린트 방법	열전사
프린트 해상도 dpi	300
프린트 속도 mm/s 최대	150
프린트 폭 mm 최대	105.7	162.6
라벨
바깥쪽 롤 치수 mm 최대	300
폭 mm	20 - 116	46 - 176
높이mm 최소 높이	20
리본
컬러 레이어	아웃사이드 또는 인사이드
길이 m 최대	600
본체의 치수
폭 x 높이 x 깊이 mm	248 x 395 x 554	358 x 395 x 554
무게 kg	22	24
인터페이스
RS232-C, USB for PC, 이더넷, 주변기기, USB host, WLAN
디지털 I/O 인터페이스

XC Q

비디오: 라벨 프린터 XC Q

2색 인쇄를 위한

비디오 보기

자세한 내용은 영문 정보를 참조하세요:

Label printers XC Q

문제가 있으시면 알려 주십시오

XC Q

지금 가격요청

지금 각격요청

XC Q

비디오: 라벨 프린터 XC Q

2색 인쇄를 위한

비디오 보기

cab 비디오 튜토리얼 XC Q

XC Q: Loading labels

XC Q: 라벨 로드 중

XC Q: Loading ribbon

XC Q: 리본 로드 중

XC Q: Cleaning printhead

XC Q: 프린트헤드 세척

XC Q: Cleaning print roller

XC Q: 프린트용 압착기 세척

문제가 있으시면 알려 주십시오

XC Q

지금 가격요청

지금 각격요청

자료

모든 확대합니다. 모든 붕괴합니다.

프로그램 안내서

이름	포맷	버전	업데이트시간	언어
cab Download Converter (download.exe) Converts image, font and database files into the JScript download data format. Install MS Visual C++ 2010 Redistributable if not available on your system.	ZIP - 9 KB	2.3	2024/10/25	–

다른 언어

이름	포맷	버전	업데이트시간	언어
Brief introduction to cab printer programming	PDF - 7.47 MB	04/2022	2025/01/15	English
cabPROTECT - Data security in label printing	PDF - 472 KB	06/2024	2024/06/20	English
Connecting cab printing systems to SAP® Compendium	PDF - 4.45 MB	01/2025	2025/02/11	English
Networked labeling with OPC UA cab and the Smart Factory	PDF - 1.12 MB	03/2019	2025/01/15	English
Programming Manual JScript for SQUIX, MACH 4S, EOS2, EOS5, XC Q, XD Q, HERMES Q, PX Q, AXON1, AXON 2, A+, HERMES+, A-Series, EOS1/4, MACH4, XD, XC	PDF - 4.25 MB	11/2024	2025/02/17	English
ZPL Emulation with cab printers	PDF - 456 KB	06/2021	2025/01/15	English

cab Video Tutorials

이름	포맷	버전	업데이트시간	언어
Video tutorial: How to clean the print roller of XC Q?	–	–	2023/12/01	–
Video tutorial: How to clean the printhead of XC Q?	–	–	2023/12/01	–
Video tutorial: How to load labels in the XC Q?	–	–	2023/12/01	–
Video tutorial: How to load ribbon in the XC Q?	–	–	2023/12/01	–

안전 데이터 시트

이름	포맷	버전	업데이트시간	언어
Safety Data Sheet Special Cleaner for Glass and Plastic GR1N	PDF - 65 KB	08/2017	2024/10/23	English
Safety Data Sheet Special Rubber Cleaner WR1	PDF - 76 KB	12/2017	2024/10/23	English

등록해야합니다

아래의 이메일과 양식에 기입하세요

이메일로 링크를 받겠어요

이름 *

성씨 *

이메일 *

cab Produkttechnik GmbH & Co KG  (hereafter "cab") or its affiliated companies hereby grants you a non-exclusive, nontransferable license at no charge to use these 3-D models and the corresponding documentation according to the following terms:
LICENSE GRANT  -  You may
- install the 3-D models on your personal computers;
- use and transmit the 3-D models on a network within a site;
- make copies of the 3-D models in machine readable form for backup purposes;
- modify the 3-D models in connection with your projects
- pass on the models to third parties in connection with your projects

LICENSE RESTRICTIONS  -  You may not:
- rent, sell, transfer or grant any rights in the 3-D models or corresponding documentation without the prior, explicit written consent of cab;
- remove any proprietary notices, labels, or marks on the 3-D models and corresponding documentation;
- make accessible to the public
- market the 3-D models as part of a product or service

NATURE OF THIS AGREEMENT  -  This license is not a sale. Provided that you pay license fees they are in consideration of the licenses granted under this Agreement. Title and copyrights to the 3-D models, corresponding documentation, and any copy made by you, remain the property of cab or its suppliers.  Failure to comply with the above restrictions shall automatically terminate this license without further notice and terminate your rights to use the 3-D models and cab shall, in addition to its other legal remedies, be entitled to its reasonable attorney fees.
LIMITED WARRANTY  - The 3-D models were compiled with great care and checked for accuracy. However cab can not guarantee that all data is up to date, correct and complete. Short-term technical changes are possible at any time. CAD software should only be used by trained staff. It is not a substitute for specialized testing and assessment. cab is not responsible for results on basis of these 3-D models. cab's entire liability and your exclusive remedy under this warranty will be, at the option of cab, to attempt to correct or help you around errors, to replace the 3-D models with functionally equivalent 3-D models, or to terminate this Agreement.
EXCEPT FOR THE ABOVE EXPRESS LIMITED WARRANTY, CAB MAKES AND YOU RECEIVE NO WARRANTIES, EXPLICIT, IMPLIED, STATUTORY OR IN ANY COMMUNICATION WITH YOU, AND CAB SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  CAB DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE UNINTERRUPTED OR ERROR FREE.
Some states do not allow the exclusion of implied warranties so the above exclusions may not apply to you.  This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
LIMITATION OF LIABILITY  -   IN NO EVENT WILL CAB BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, WHILE LOADING THESE 3-D MODELS OR OTHERWISE, LOST PROFITS, COST OF COVER OR OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT  DAMAGES ARISING FROM THE USE OF THE 3-D MODELS OR CORRESPONDING DOCUMENTATION, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY.  THIS LIMITATION WILL APPLY EVEN IF CAB HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Some states do not allow the limitation or exclusion of liability for incidental, or consequential damages, so the above limitation may not apply to you.
If this agreement is translated into any other language than German, the German version remains the authoritative version.
If any of the afore mentioned provisions should be or become ineffective, this does not affect the validity of the remaining provisions. The ineffective or invalid provision shall be replaced by the corresponding statutory ruling, unless the parties reach legally effective agreement on another solution. The same also applies to any loopholes in the contract.

Accept license

3D CAD 모듈

cad 파일이라서 cad 소프트웨어로 하세요. 개인정보 이용약관 본 자료를 다른 사람에 제공하지 말아요. 본 카데고리를 개진하고 있습니다. 더 모델들이 제공합니다.

Cutter_CSQ_402_5984565.zip (2.35 MB)
Cutter_CSQ_402_tray_5984565.zip (2.41 MB)
Cutter_CU400_ 5948300.zip (387 KB)
XC_Q4.zip (5.53 MB)
XC_Q6.zip (5.88 MB)

PDF 파일을 읽으면 Adobe Reader 소프트웨어를 아운로드해야 합니다. Adobe Reader 다운로드

문제가 있으시면 알려 주십시오

XC Q

지금 가격요청

지금 각격요청

소프트웨어하고 driver프로그램

모든 확대합니다. 모든 붕괴합니다.

펌웨어

이름	포맷	버전	업데이트시간	언어
cabFirmwareUpdater Windows 32 & 64 bit (starting from Vista)	ZIP - 21.75 MB	3.12.0.0	2025/03/26	–
Firmware X4 Firmware SQUIX \| EOS2 \| EOS5 \| MACH 4S \| XD Q \| XC Q \| HERMES Q \| PX Q \| AXON	ZIP - 53.60 MB	5.46.1	2025/04/14	–
Release Notes Firmware X4	TXT - 120 KB	5.00 - 5.46.1	2025/04/14	–

펌웨어 액세서리

이름	포맷	버전	업데이트시간	언어
cabFirmwareUpdater Windows 32 & 64 bit (starting from Vista)	ZIP - 21.75 MB	3.12.0.0	2025/03/26	–
Firmware CSQ 401, CSQ 402, PSQ 403, PSQ404	ZIP - 59 KB	3.12.0	2025/04/08	–
Firmware I/O 24V25-4	ZIP - 17 KB	1.1.0	2025/01/23	–

디바이스 드라이버

이름	포맷	버전	업데이트시간	언어
cab Linux Armv7 - 32 Bit Driver CUPS Linux Armv7 32bit Driver RPi 2/3/4 (min. CUPS 1.2)	GZ - 2.80 MB	1.46	2024/10/23	–
cab Linux Armv8(aarch64) - 64 Bit Driver CUPS Linux Armv8 64 Bit Driver RPi 3/4 (min. CUPS 1.2)	GZ - 2.80 MB	1.46	2024/10/23	–
cab Linux x86 - 32 Bit Driver CUPS Linux Intel 32bit Driver (min. CUPS 1.2)	GZ - 2.81 MB	1.46	2024/10/23	–
cab Linux x86 - 64 Bit Driver CUPS Linux Intel/AMD 64bit Driver (min. CUPS 1.2)	GZ - 2.80 MB	1.46	2024/10/23	–
cab MAC OS Driver Apple® Mac OS 10.15 - 15.4	ZIP - 2.97 MB	1.46	2025/04/01	–
cab MAC OS X Driver Apple® Mac OS X 10.6 - 10.14	ZIP - 5.82 MB	1.46	2024/10/23	–
cab Windows Driver NEW Windows 10, Windows 11, Windows Server 2016, Windows Server 2019, Windows Server 2022 - 64Bit, requires Visual C++ 2022	ZIP - 24.01 MB	1.4.1.0	2025/03/24	–
cab Windows Driver NEW Release Notes	PDF - 120 KB	1.2.1.20 - 1.4.1.0	2025/03/24	–

웨어

이름	포맷	버전	업데이트시간	언어
cab Download Converter (download.exe) Converts image, font and database files into the JScript download data format. Install MS Visual C++ 2010 Redistributable if not available on your system.	ZIP - 9 KB	2.3	2024/10/25	–
cablabel S3 Demo (Free) Windows Vista, 7, 8, 10, 11, Server 2008, 2008 R2, 2012, 2012 R2, 2016, 2019, 2022	ZIP - 51.42 MB	1.4.0.9	2025/04/01	–
cablabel S3 Lite (Free) Windows Vista, 7, 8, 10, 11, Server 2008, 2008 R2, 2012, 2012 R2, 2016, 2019, 2022	ZIP - 68.19 MB	1.4.0.9	2024/11/26	–
cablabel S3 Print Windows Vista, 7, 8, 10, 11, Server 2008, 2008 R2, 2012, 2012 R2, 2016, 2019, 2022	ZIP - 57.82 MB	1.4.0.9	2024/11/26	–
cablabel S3 Pro Windows Vista, 7, 8, 10, 11, Server 2008, 2008 R2, 2012, 2012 R2, 2016, 2019, 2022	ZIP - 68.64 MB	1.4.0.9	2024/11/26	–
Database Connector Windows 32 & 64 bit	ZIP - 10.93 MB	4.3.0.1	2024/10/25	–
LogService for Database Connector	ZIP - 4.15 MB	1.7.1.0	2024/10/25	–

PDF 파일을 읽으면 Adobe Reader 소프트웨어를 아운로드해야 합니다. Adobe Reader 다운로드

문제가 있으시면 알려 주십시오

XC Q

지금 가격요청

지금 각격요청

Headquarters

cab Produkttechnik GmbH & Co KG
Wilhelm-Schickard-Str. 14
76131 Karlsruhe
Germany

+886 2 8227 3966
이메일로 알려주십시오

Sales Office Asia

cab Technology Co., Ltd.
16F-1, No. 700, Jhong-Jheng Road.,
Junghe 23552, Taipei, Taiwan
+886 2 8227 3966
info.asia@cab.de

Sales Office China

cab (Shanghai) Trading Co., Ltd.
Room 908, Building D, No. 999, Jin Zhong Road
Changning District, 200335 Shanghai, China
+86 21 6236 3161
info.cn@cab.de

Sales Office Singapore

cab Singapore Pte. Ltd.
59 Ubi Avenue 1 04-13
Singapore 408938
+65 6931 9099
info.asia@cab.de

cab 의: