라벨 프린터
A+
매우 작거나 매우 넓은 라벨의 경우

전문 산업용 cab 라벨 프린터는 다양한 어플리케이션에 사용됩니다
우선적으로 높은 신뢰성과 결합된 간단하고 편리한 작동에 중점을 두고 개발하고 있습니다. 인쇄 유닛과 하우징은 고품질의 재질로 만들어져 모양과 기능면에서 완벽하게 조화를 이룹니다. 광범위한 주변기기 및 소프트웨어를 통해 언제든지 맞춤형 솔루션을 구현할 수 있습니다.
A+프린터가 독립 실행형 솔루션으로 작동하든, PC 애플리케이션이든 이런 것들과 무관하게 항상 표시됩니다. 고속 프로세서는 신속한 작업 처리와 즉시 라벨 출력을 보장합니다.
A2+, A4+ 및 A6+의 후속 모델, 새 라벨 프린터인 SQUIX2, SQUIX 4 및 SQUIX 6을 참조하십시오。
특별히 광범위한 프린터
팔레트 및 배럴 라벨 용
1.4 라벨 프린터 | A8+ |
---|---|
인쇄 가능한 해상도 dpi | 300 |
최대 인쇄 폭 mm | 216 |
최대 인쇄 속도 mm/s | 150 |

"The cab printers enable us to realize everything that is needed. Thereby, we achieve very good results."
Walter Dinzenhofer, Logistics Development at Amoena medical technology
Case study: Label printer A4+ in use at Amoena medical technology
- 분배 기능 포함 A8+ 라벨 프린터
1 넓은 그래픽 디스플레이
최적의 가독성을 위한 흰색 백라이트.
2 리본 홀더
세 부분 조임 축을 통해 리본을 빠르고 쉽게 교환 할 수 있습니다.
3 간단한 조정
프린트 헤드는 두 번 토글됩니다. 하나는 왼쪽 라벨 여백에, 다른 하나는 오른쪽 라벨 여백에 푸시됩니다.
4 주변 연결
애드온 모듈은 쉽게 연결할 수 있습니다. 모든 주변 장치는 두 개의 핀을 사용하여 프린터에 연결되며 나사로 제자리에 고정됩니다.
5 견고한 금속 하우징
다이캐스팅 알루미늄. 모든 부품이 장착되어 있습니다.
6 롤 홀더
38 mm부터 시작하는 코어 직경 (라벨 감기 개선을 위해 76 mm 어댑터 제공) 에 사용 가능. 스프링 장착 마진 정지 장치는 급지 중 일정한 장력을 보장하여 높은 인쇄 정밀도를 보장합니다.
A2+, A4+ 및 A6+의 후속 모델, 새 라벨 프린터인 SQUIX2, SQUIX 4 및 SQUIX 6을 참조하십시오。
![]() ![]() |
1.1 | 1.2 | 1.3 | 1.4 | ||||
라벨 프린터 | A2+ | A4+ | A6+ | A8+ | ||||
---|---|---|---|---|---|---|---|---|
프린트 헤드 | ||||||||
인쇄 방법: 열전사 | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
인쇄 방법: 감열 | ![]() |
- | ![]() |
![]() |
- | ![]() |
![]() |
![]() |
인쇄 가능한 해상도 dpi | 300 | 600 | 203 | 300 | 600 | 203 | 300 | 300 |
최대 인쇄 속도 mm/s | 150 | 100 | 250 | 250 | 100 | 200 | 200 | 150 |
최대 인쇄 폭 mm | 54.2 | 57 | 104 | 105.6 | 105.6 | 168 | 162.6 | 216 |
재료 | 종이, 판지, 섬유, 플라스틱 | |||||||
롤 또는 팬 폴드상의 라벨 또는 연속 재료 | ![]() |
![]() |
![]() |
![]() |
||||
재료 두께 mm / 무게 g/m2 | 0.05-0.8 / 60-300 | |||||||
너비 라벨 mm1) | 4-63 | 20-116 | 46-176 | 46-220 | ||||
너비 연속 재료 / 라이너 mm | 24-67 | 24-120 | 50-180 | 50-235 | ||||
너비 연속 열 수축 튜브 mm | 10-67 | 25-85 | - | - | ||||
라벨 높이1) mm 백 피드없는 | 4 | 4 | 6 | 10 | ||||
라벨 높이1 디스펜스 할 때1) mm에서 | 12 | 12 | 25 | - | ||||
라벨 높이1 최대 mm | 5,000 | 2,000 | 5,000 | 4,000 | 1,000 | 4,000 | 3,000 | 2,000 |
외경이 mm 인 미디어 롤 | 205 | 205 | 205 | 205 | ||||
외경이 코어 직경 mm | 38-100 | 38-100 | 38-100 | 38-100 | ||||
외경이 윈딩 | 외부 또는 내부 | |||||||
리본 | ||||||||
잉크면 | 외부 또는 내부 | |||||||
롤 직경 최대 mm | 80 | 80 | 80 | 72 | ||||
코어 직경 mm | 25 | 25 | 25 | 25 | ||||
변하기 쉬운 길이 m 까지 | 500 | 500 | 500 | 360 | ||||
너비 mm 2) 까지 mm | 57 | 114 | 165 | 220 | ||||
내부 되감기 장치 (필 오프 장치에서만) | ||||||||
외경이 mm 인 | 142 | 142 | 142 | - | ||||
코어 직경 mm | 38.1 | 38.1 | 38.1 | - | ||||
라벨 윈딩 | 외부에만 | 외부에만 | 외부에만 | - | ||||
치수 및 무게 | ||||||||
높이 mm | 274 | 274 | 274 | 274 | ||||
깊이 mm | 446 | 446 | 446 | 446 | ||||
너비 mm | 190 | 242 | 302 | 352 | ||||
무게 kg | 8.5 | 9 | 13 | 15 | ||||
라벨 센서 | ||||||||
갭 센서 | 선단 또는 펀칭 흔적과 재료 끝 부분 | |||||||
바닥의 반사 센서 / 선택적으로 상단에서 | 인쇄 표시용 | |||||||
위치 가장자리까지의 거리 mm | 5-26 | 5-53 | 5-53 | 5-53 | ||||
전자 제품 | ||||||||
프로세서 32 비트 클록 속도 MHz | 266 | |||||||
주 기억 장치 (RAM) MB | 64 | |||||||
IFFS 프린터 메모리 MB 플래시 | 8 | |||||||
CompactFlash I 형 플러그인 | ![]() |
|||||||
CompactFlash I 무선랜 카드 | ![]() |
|||||||
실시간 시계 시 배터리 버퍼 | ![]() |
|||||||
음향 오류 신호 | ![]() |
|||||||
인터페이스 | ||||||||
IEEE 1284에 따른 센트로닉스 접속 장치 | ![]() |
|||||||
RS232 C | ![]() |
|||||||
PC 용 USB 2.0 고속 슬레이브 | ![]() |
|||||||
이더넷 10/100 Base T, LPD-, RawIP-, FTP-인쇄, DHCP, HTTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP | ![]() |
|||||||
RS422/RS485 | ![]() |
|||||||
주변 연결 | ![]() |
|||||||
WLAN 802.11b/g WEP/WPA-PSK (TKIP) | ![]() |
|||||||
외부 조작 패널, 키보드, 스캐너, 서비스 키, USB 스틱 용 USB 호스트 2 개 | ![]() |
|||||||
운영 데이터 | ||||||||
전원 공급 장치 | 100-240 V ~ 50/60 Hz, PFC | |||||||
전력 소비 W | 프린터 유형에 따라 100-300 | |||||||
온도 / 습도 조작 프로세스 | 5-40°C / 10-85% 응축되지 않음 | |||||||
온도 / 습도 보관 상태 | 0-60°C / 20-80% 응축되지 않음 | |||||||
온도 / 습도 운송 도중 | –25-60°C / 20-80% 응축되지 않음 | |||||||
승인 | CE, FCC class A, CB, CCC, UL |
For more technical data please read the product brochure (PDF)
A2+, A4+ 및 A6+의 후속 모델, 새 라벨 프린터인 SQUIX2, SQUIX 4 및 SQUIX 6을 참조하십시오。
Videos
A+ series - for industrial demands
A+ series with applicator A1000 - print and apply
Case study: Amoena medical technology
cab video tutorials
A+ series - cleaning the printhead
Label printer A4+ print head exchange
A+ series - changing the print roller
A+ series - insertion of outside wound label rolls
A+ series - insertion of inside wound label rolls
A+ series - insertion of outside wound thermal transfer ribbon
A+ series - insertion of inside wound thermal transfer ribbon
Video: A+ series - for industrial demands
Powered by YouTube. See all cab videos: cab channel on YouTube.
Other formats
- A+ series - for industrial demands (MPEG-4, 290 MB)
- A+ series - for industrial demands (WMV, 288 MB)
Video: A+ series with applicator A1000
Powered by YouTube. See all cab videos: cab Channel auf YouTube.
Other formats:
- A+ series with applicator A1000 (MPEG-4, 46,8 MB)
- A+ series with applicator A1000 (WMV, 46,4 MB)
Application video (in German)
Label printer A4+ in operation at our customer Amoena medical technology.
cab video tutorials A+ series

A+ series - changing the print roller

A+ series - Insertion of inside wound label rolls

A+ series - insertion of outside wound thermal transfer ribbon

A+ series - insertion of inside wound thermal transfer ribbon
Download players:
- For Flash: Adobe Flash Player
- For WMV: Windows Media Player
- For MPEG-4: VLC Player
A2+, A4+ 및 A6+의 후속 모델, 새 라벨 프린터인 SQUIX2, SQUIX 4 및 SQUIX 6을 참조하십시오。
자료
-
제품목록
-
이름 포맷 버전 업데이트시간 언어 A8+, XD4T, XC
PDF - 2.61 MB 03/2022 2022/03/11 English
-
-
사용자 안내서
-
이름 포맷 버전 업데이트시간 언어 Operator's Manual A+ (up to SN 79999)
PDF - 2.88 MB 01/2009 2020/11/26 English
-
-
규격 안내서
-
이름 포맷 버전 업데이트시간 언어 Configuration Manual cab Label Printers
PDF - 1.15 MB 09/2016 2020/12/03 English
-
-
간단한 조작 안내서
-
이름 포맷 버전 업데이트시간 언어 Brief introduction to cab printer programming
PDF - 7.47 MB 04/2022 2022/04/12 English
-
-
프로그램 안내서
-
이름 포맷 버전 업데이트시간 언어 Basic compiler abc
PDF - 113 KB 09/11 2021/02/02 English cab Download Converter (download.exe)
Converts image, font and database files into the JScript download data format.
Install MS Visual C++ 2010 Redistributable if not available on your system.ZIP - 9 KB 2.3 2021/07/19 – Printhead replacement / Austausch des Druckkopfes / Remplacement tête
A4+, Hermes+4, XD4, XC4, PX 4PDF - 712 KB 06/2014 2018/04/27 English/Deutsch/Français Webservices ASPC
ASP.net C#PDF - 617 KB 1.4 2017/07/27 English Webservices ASPVB
ASP.net VBPDF - 577 KB 1.4 2017/07/27 English Webservices general
PDF - 267 KB 1.4 2017/07/27 English Webservices NetBeans
Java NetbeansPDF - 649 KB 1.4 2017/07/27 English
-
-
수리 안내서
-
이름 포맷 버전 업데이트시간 언어 Service Manual A+ Series / A4+M
PDF - 3.63 MB 03/2018 2020/12/02 English
-
-
cab Video Tutorials
-
이름 포맷 버전 업데이트시간 언어 How do I change a print head at A4+?
cab video tutorial– – 2017/02/27 English How to exchange the print roller for A+ series
cab video tutorial– – 2014/09/25 English How to insert label and ribbon rolls in printers of A+ series?
cab video tutorials– – 2014/09/26 English When and how should a printhead be cleaned?
cab video tutorial– – 2014/09/25 English
-
-
액세서리제품
-
액세서리부품
-
이름 포맷 버전 업데이트시간 언어 Spare Parts List Cutter CU Series
PDF - 254 KB 03/2016 2021/02/18 English Spare Parts List Perforation Cutter PCU Series
PDF - 256 KB 03/2016 2021/02/18 English Spare Parts List Stacker with Cutter ST4
PDF - 672 KB 09/2017 2021/02/18 English Spare Parts List External Rewinder ER1, ER2, ER3, ER4, ER6, ER8
PDF - 1.07 MB 06/2019 2021/02/18 English Spare Parts List External Unwinder EU4, EU6, EU8
PDF - 276 KB 03/2016 2021/02/18 English
-
-
부품
-
이름 포맷 버전 업데이트시간 언어 Spare Parts List A2+
PDF - 1.09 MB 10/2020 2021/03/17 English Spare Parts List A4+ (incl A4-3+)
PDF - 1.39 MB 10/2020 2021/03/17 English Spare Parts List A6+
PDF - 1.16 MB 10/2020 2021/03/17 English Spare Parts List A8+
PDF - 981 KB 10/2020 2021/02/18 English
-
3D CAD 모듈
cad 파일이라서 cad 소프트웨어로 하세요. 개인정보 이용약관 본 자료를 다른 사람에 제공하지 말아요. 본 카데고리를 개진하고 있습니다. 더 모델들이 제공합니다.
PDF 파일을 읽으면 Adobe Reader 소프트웨어를 아운로드해야 합니다. Adobe Reader 다운로드
소프트웨어하고 driver프로그램
-
펌웨어
-
이름 포맷 버전 업데이트시간 언어 cabFirmwareUpdater
Windows 32 & 64 bit (starting from Vista)ZIP - 15.50 MB 3.10.0.0 2022/02/07 – Firmware X2
Firmware MACH4, A+, XD4, XC, Hermes+, Hermes C, PXZIP - 3.19 MB 3.51 2021/07/05 – Release Notes Firmware X2
Firmware MACH4, A+, XD4, XC, Hermes+, Hermes C, PXTXT - 12 KB
3.32 - 3.51 2021/07/05 – Thai Font
min. Firmware Version 3.11ZIP - 811 KB – 2021/02/02 –
-
-
디바이스 드라이버
-
이름 포맷 버전 업데이트시간 언어 cab Windows Driver
32/64 Bit (Vista - Windows 7 - Windows 8 - Windows 8.1 - Windows 10 - Windows Server 2008, 2008 R2, 2012, 2012 R2, 2016, 2019) CERTIFIEDZIP - 9.37 MB 5.3.03 2020/10/05 – cab Linux x86 - 32 Bit Driver
CUPS Linux Intel 32bit Driver (min. CUPS 1.2)GZ - 2.67 MB 1.45 2022/05/05 – cab Linux x86 - 64 Bit Driver
CUPS Linux Intel/AMD 64bit Driver (min. CUPS 1.2)GZ - 2.66 MB 1.45 2022/05/05 – cab Linux Armv7 - 32 Bit Driver
CUPS Linux Armv7 32bit Driver RPi 2/3/4 (min. CUPS 1.2)GZ - 2.66 MB 1.45 2022/05/05 – cab Linux Armv8(aarch64) - 64 Bit Driver
CUPS Linux Armv8 64 Bit Driver RPi 3/4 (min. CUPS 1.2)GZ - 2.66 MB 1.45 2022/05/05 – cab MAC OS X Driver
Apple® Mac OS X 10.6 - 10.14ZIP - 5.34 MB 1.45 2022/05/03 – cab MAC OS X Driver
Apple® Mac OS X 10.15 - 12.0ZIP - 2.77 MB 1.45 2022/05/03 –
-
-
웨어
-
이름 포맷 버전 업데이트시간 언어 cab Download Converter (download.exe)
Converts image, font and database files into the JScript download data format.
Install MS Visual C++ 2010 Redistributable if not available on your system.ZIP - 9 KB 2.3 2021/07/19 – cablabel S3 Demo (Free)
Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2, 2016, 2019ZIP - 51.42 MB 1.4.0.3 2021/09/30 – cablabel S3 Lite (Free)
Windows Vista, 7, 8, 10, 11, Server 2008, 2008 R2, 2012, 2012 R2, 2016, 2019, 2022ZIP - 64.24 MB 1.4.0.4 2022/02/08 – cablabel S3 Print
Windows Vista, 7, 8, 10, 11, Server 2008, 2008 R2, 2012, 2012 R2, 2016, 2019, 2022ZIP - 53.90 MB 1.4.0.4 2022/02/08 – cablabel S3 Pro
Windows Vista, 7, 8, 10, 11, Server 2008, 2008 R2, 2012, 2012 R2, 2016, 2019, 2022ZIP - 64.51 MB 1.4.0.4 2022/02/08 – Database Connector
Windows 32 & 64 bitZIP - 10.93 MB 4.3.0.1 2020/12/15 – LogService
for Database ConnectorZIP - 4.15 MB 1.7.1.0 2020/12/15 – Network Manager
JRE 6 - 8 requiredZIP - 2.35 MB 3.3.0 2018/11/07 –
-
PDF 파일을 읽으면 Adobe Reader 소프트웨어를 아운로드해야 합니다. Adobe Reader 다운로드