이 웹 사이트 쿠키를 사용합니다. 본 웹 사이트를 사용하시면 우리의 프라이버시 정책에 따라 쿠키로 동의합니다. 쿠키를 원하지 않으면 웹 브라우저 안에서 관하는 기능을 닫습니다. 더 자세한 정보를 필요하시면 우리의프라이버시 정책에참고합니다.

분리기 MAESTRO 4S

Stressless separating of pre-scored PCBs

The MAESTRO 4S fulfills your expectations to variety for the following requirements:

  •  Delicate components are mounted directly next to the pre-scored groove.
  •  You separate PCBs with a thickness up to 3.2 mm.
  •  Aluminum PCBs have to be separated.

The PCB separator MAESTRO 4S traverses the prescored groove in up to 5 steps. The blade distance is simultaneously reduced in programmable steps from 0.6 mm to 0.05 mm. You can save up to eight programs via operation panel.

The repeated traverse minimizes tensile and compression strength (see diagram) and thereby the danger to damage delicate components next to the pre-scored groove. This procedure grants separating of thick FR4 or aluminum PCBs without chipping.

Already an increase of 0.1 mm of the factory set blade distance halves the tensile and compression stress. An increase of 0.2 mm reduces the stress tenfold (see diagram).

Diagram

 

Technical data MAESTRO 4S
Separation type Component side: circular blade
Soldering side: linear blade
Operation motorized
Separation speed 300/500 mm/s switchable
PCB
Material FR4, Aluminum
Thickness 0,8–3,2 mm
Scribing depth min. 0,25 mm
Residual thickness max. 1,2 mm
Height of components Component side/Soldering side up to 34 mm
Extension of the outer diameter after separation up to 0,3 mm
Cutting length MAESTRO 4S/450
Cutting length MAESTRO 4S/600
up to 450 mm
up to 600 mm
Depth storage table 200 mm
Operation panel functions
Home Request drive to starting position, Acknowledge
Cutting speed H (High): 500 mm/s
L (Low): 300 mm/s
Program Program 1 res. for basic setting;
Program 2 to 9 adjustable
Step (Cutting steps) 1 – 5
Blade distance 0.6 mm to 0.05 mm
Key switch button Release of programming
Mileage (Kilometer counter) 0.001 to 99.99 km
DEL Reset of the kilometer counter
Operation
Power switch ON/OFF
Foot switch START Separation
Safety switch Emergency stop
Operating data
Operating voltage 100–240 V~ 50/60 Hz, PFC
Temperature/humidity
Operation +5–40°C/10–85% not condensing
Storage 0–60°C/20–80% not condensing
Transport -25–60°C/20–80% not condensing
Approvals CE, FCC class A
Emission sound pressure level LpA < 70 dB (A)
Dimensions
Height/depth 434/425 mm
Width MAESTRO 4S/450 702 mm
Width MAESTRO 4S/600 852 mm
Weight
MAESTRO 4S/450 38 kg
MAESTRO 4S/600 46 kg

자료

PDF 파일을 읽으면 Adobe Reader 소프트웨어를 아운로드해야 합니다. Adobe Reader 다운로드

cab Produkttechnik GmbH & Co. KG

Wilhelm-Schickard-Str. 14
76131 Karlsruhe

+886 2 8227 3966
이메일로 알려주십시오

cab 의:

Sales Office Asia

cab Technology Co., Ltd.
16F-1, No. 700, Jhong-Jheng Road.,
Junghe 23552, Taipei, Taiwan
+886 2 8227 3966
info.asia@cab.de

Sales Offices China

Sales Offices China
cab (Shanghai) Trading Co., Ltd.
Room 710, Building B, 999, Jin Zhong Road
Shanghai 200335, China
+86 21 6236 3161
info.cn@cab.de

Room 39, 10F, 8 Lin He Zhong Road
Tian He District, Guangzhou 510610, China
+86 20 2831 7358
info.cn@cab.de

Tweets von @cab_news


14 시간

@Taflynot EOS4 processes rolls with a maximum diameter (not width!) of 203 mm. Maximum print widths are 108 mm (at 200 dpi) and 105.7 mm (at 300 dpi)

Twitter로 보다


cab Twitter 요청