If you don't want to allow cookies, you can turn off this feature in your browser. Learn more in our privacy policy.

Want to learn more?

Call us

Email us

Request support

Label printers XD4T
For double-sided printing

It prints on both sides of textile tapes, cardboard labels, pressed tubes continuous or ready-for-use, as well as on endless materials made of plastic, paper or cardboard. The ribbon separates from the materials with the help of a draw roller that also improves the accuracy of the imprint.

No print head adjustment necessary with different material widths. Print rollers provided for slim and thin materials.

For single-sided printing with centered material positioning and drawing roller please go to label printer SQUIX 4 MT.

Textile labels
Double-sided printing, for example textile labels, shrink tubes and continuous materials
Label printer XD4T
Printable resolution dpi 300
Print speed up to mm/s 125
Print width up to mm 105.6

 

Accessories for label printer  XD4T

Perforation and cutter

Cutter CU4

Paper labels, self-adhesive labels, cardboard, textile and plastic materials as well as shrink tubes can be cut.

Perforation cutter PCU4

In addition, the materials can be perforated before they are manually separated.

Stacker with cutter

Stacker ST4 M with cutter

The printed materials are cut and stacked. If the maximum stack height is reached, printing is interrupted. Even stiff or curved materials can be processed. We recommend to have these applications tested at our premise.

Constantly good print quality

High print image with cab ribbons.

The right material for every application.

New label software cablabel S3

The software, which was developed by cab, opens the full potential of cab devices during label design.

cablabel S3 Lite free download

Label printer XD4T

1 Large graphic display
White backlight for optimum readability.

2 Ribbon holder
The three-part tightening axles enable the ribbon to be easily inserted. A preprinted ruler simplifies the adjustment.

3 Plungers
The print head is pressed on by two plungers. As the materials are centre-guided in the device, no print head setting or adjustment is necessary.

4 Antistatic brush
Particularly with plastic materials the electrostatic charge is discharged after printing.

5 Material guide
The material guide just in front of the print roller provides ac curate imprint. The material width is adjusted with a spindle.

6 Periphery connection
Additional modules are quick and easy to connect. All peripheral devices are plugged to the printer with the help of two pins and are fixed with a screw.

7 Separator
primarily if continuous or textile materials as well as shrink t ubes are processed. At high heat energy the ribbon can stick with the textile tape. A roller reliably separates the material from the ribbon.

8 Rugged metal chassis
made of cast aluminum. Basis to assemble all the units

9 Roll holder
picking up core diameters of at least 38 mm (76 mm adapters for a better label winding are included in the delivery). The material roll automatically centers when setting the margin stop. In case of core diameter 100 mm, an adapter is recommended.

DR4-M25     DR4-M25

DR4-M50     DR4-M50

DR4-M80     DR4-M80

DR4S     DR4S

10 Slim print rollers DR4-M
In order to achieve an accurate imprint with slim materials and ribbons, also slim print rollers are needed. These prevent from print roller wear, print head contamination and errors during material feed.
Coating: synthetic rubber

11 Print roller DRS
It has an extra long service life at a higher imprint tolerance. Coating: silicone

standard Standard     Optional

Label printer XD4T
Print head  
Material feed centered
Printing method Thermal transfer standard
Printing method Thermal direct -
Printable resolution dpi 300
Print speed up to mm / s 125
Print width up to mm 105.6
Material  
Roll, reel: Paper, cardboard, plastics such as
Roll, reel: PET, PE, PP, PI, PVC, PU, acrylate, Tyvec
standard
Roll, reel: Pressed shrink tubes standard
Roll, reel: Textile tapes standard
Labels1)  Width mm 10-110
Labels     Height mm 20 - 2,000
Labels   Thickness mm 0.05 - 0.8
Liner material Width mm 10-110
Continuous material Width mm 4-110
Continuous material Weight (cardboard) up to g/m2 300
Shrink tubes Width ready-for-use up to mm 110
Shrink tubes Width continuous mm 4 - 85
Shrink tubes Thickness up to mm 1.1
Roll, reel Outside diameter up to mm 300
Roll, reel Core diameter mm 38 - 100
Roll, reel Winding outside or inside
Ribbon2)
Ink side outside or inside
Roll diameter up to mm 72
Core diameter mm 25
Variable length up to m 360
Width up to mm 114
Printer sizes and weight
Width x Height x Depth mm 248 x 395 x 554
Weight kg 21
Label sensor with position indication
Gap sensor for labels, punch marks or print marks in transparent materials and end of material
Reflective sensor from below or top (option) for print marks in not transparent materials and end of material
Distance sensor from centre to the left mm 0 - 53
Electronics
Processor 32 bit clock rate MHz 266
Main storage (RAM) MB 64
Data storage (IFFS) MB Flash 8
Slot for CompactFlash Type I standard
Slot for WLAN card standard
Battery buffer for real-time clock standard
Acoustic error signal standard
Interfaces
USB 2.0 Hi-speed slave to connect a PC standard
Ethernet 10/100 Base-T LPD, RawIP printing, FTP, DHCP, HTTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP
Periphery connection standard
WLAN 802.11b/g, WEP/WPA-PSK (TKIP)
2 x USB host for Service Key, USB memory stick, keyboard, barcode scanner, external operation panel
Operating data
Power supply 100 - 240 V ~ 50/60 Hz, PFC
Power consumption 100 - 300 W depending from the type of device
Temperature / humidity  Operation 5-40°C/10-85% not condensing
Temperature / humidity  Storage 0-60°C/20-80% not condensing
Temperature / humidity  Transport – 25-60°C/20-80% not condensing
Approvals CE, FCC, CB, cULus, CCC

For more technical data please read the product brochure (PDF)

  1. Limitations may apply to small labels, thin materials or strong adhesives. Critical applications need to be tested.
  2. The ribbon should at least correspond with the width of the liner mat erial.

Documentation

You need Adobe Reader to view the PDF-files. Some documents require version 7 or above. Download current version of Adobe Reader

Services and trainings

Well-trained cab service engineers worldwide support in the maintenance and repair of the devices.

Learn more

Here you can download firmware, drivers and software. Documentation on label software, printers programming and administration as well as integration of cab printers into SAP systems:
Label software
 

Software & Drivers

  • Firmware

    • Title Format Version Last change Language
      Firmware X2
      Firmware MACH4, A+, XD4, XC, Hermes+, Hermes C, PX
      ZIP - 3.19 MB 3.48 13/03/2019
      Release Notes Firmware X2
      Firmware MACH4, A+, XD4, XC, Hermes+, Hermes C, PX
      cab CHANGELOG - 11 KB 3.32 - 3.48 13/03/2019
      cabFirmwareUpdater
      Windows 32 & 64 bit
      ZIP - 12.94 MB 3.8.0.0 18/01/2019
      Thai Font
      min. Firmware Version 3.11
      ZIP - 811 KB 17/07/2015
  • Drivers

    • Title Format Version Last change Language
      cab Windows Driver
      32/64 Bit (Vista - Windows 7 - Windows 8 - Windows 8.1 - Windows 10 - Windows Server 2008, 2008 R2, 2012, 2012 R2, 2016) CERTIFIED
      ZIP - 8.64 MB 5.3.00 06/12/2018
  • Software

    • Title Format Version Last change Language
      cablabel S3 Lite (Free)
      Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2
      ZIP - 58.13 MB 1.2.0.2 06/12/2018
      cablabel S3 Pro
      Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2
      ZIP - 58.21 MB 1.2.0.2 06/12/2018
      cablabel S3 Print
      Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2
      ZIP - 48.93 MB 1.2.0.2 29/11/2018
      Database Connector
      Windows 32 & 64 bit
      ZIP - 10.93 MB 4.3.0.1 04/07/2017 English/Deutsch/Français
      cab Database Connector - old -
      Replaced by „Database Connector“ and „LogService”
      ZIP - 1.69 MB 4.2 17/08/2017 English
      cab Download Converter (download.exe)
      Converts image, font and database files into the JScript download data format.
      Install MS Visual C++ 2010 Redistributable if not available on your system.
      ZIP - 9 KB 2.2 27/07/2017 English
      LogService
      for Database Connector
      ZIP - 4.15 MB 1.7.1.0 11/01/2016 English/Deutsch/Français
      cablabel S3 Demo (Free)
      Windows Vista, 7, 8, 10, Server 2008, 2008 R2, 2012, 2012 R2
      ZIP - 51.42 MB 1.2.0.2 29/11/2018
      Network Manager
      JRE 6 - 8 required
      ZIP - 2.35 MB 3.3.0 07/11/2018

You need Adobe Reader to view the PDF-files. Some documents require version 7 or above. Download current version of Adobe Reader

cab Produkttechnik GmbH & Co. KG

Wilhelm-Schickard-Str. 14
76131 Karlsruhe
Germany

Call us
Email us
Request support

cab on:

Tweets by @cab_news

2 days ago

With the version 1.2.0.1 (or newer) of the cablabel S3 , manual text is possible: https://www.cablabel.com/blog/2019/05/06/text-tags/ …

Show tweet on Twitter


4 days ago

Mobile - in production areas, warehouses or agriculture. Wherever labels are required and access to is missing: https://www.cab.de/en/marking/label-printer/eos25/?ref=nav_lang …

Show tweet on Twitter


Follow us on Twitter

cab Newsletter

Our cab-newsletter will inform you regulary about the topic marking by email. Free of charge and not binding. To address you personally and individually, we require some more infomation of you.

subscribe now!
unsubscribe
Live Chat