Description

MAESTRO 4M separates both small and large PCBs fast and economically. To optimize operation, the separation length can be programmed with the control keys.

Strain of components
Frequently for critical components an upper limit of tensile stress will be determined. Please ask us regarding possibilities to reduce tensile stress of components.

Variants

• zoom in

  MAESTRO 4M/450

  Separation length 450 mm
  (600 mm separation length available on request)

• zoom in

  MAESTRO 4M/450 clean

  with additional dust extraction
  separation length 450 mm

• zoom in

  MAESTRO 4M/70/370

  Separation length 370 mm
   

• zoom in

  Conveyor belt for higher performance

  The PCBs are transported out of the machine after separation.

Safe Operation

zoom in

The PCB is placed with its pre-scored groove onto the linear blade. When the foot switch is pressed, the blade carrier with the circular blade moves across the PCB, separating it into individual units. The clearance between the upper guide and the linear blade is adjustable to ensure that the PCB is only separated in the pre-scored groove. The table can be continuously adjusted with the rotary knob whenever required while the rest can be adjusted in three steps to the most suitable working position.

Technical Data PCB Separator

Separation type
Component side: circular blade
Solder side: linear blade

Operation
Optimized motor driven

Separation speed
300/500 mm/s

Mains voltage
230/115 V~ 50 - 60 Hz

Earthing stud
Ø 10 mm

Operating temperature
10 - 35° C

Storage/transport temp.
-20 - 50° C

Humidity, non-condensing
10 - 85%

Safety regulations
CE, FCC class 1

Technical Data Conveyor Belt

Material of conveyor belt
Antistatic

Direction of belt travel
To the right

Belt speed
5/6/7/8/9 m/min

Light barrier
Can be activated for belt stoppage

Safety regulations
CE, FCC class 1

Width of table
540 mm

Weight
14 kg

Conveyor belt for higher performance

The PCBs are transported out of the machine after separation. The light barrier at the end of the conveyor belt can stop the arriving PCBs.

Dust Extraction

Harmful dusts occur when separating PCB´s by scoring, sawing, stamping and milling. These dusts can be removed with the Fume Extractor according to regulations.

When using the Fume Extractor with the PCB the extractor is switched on together with the machine. The extraction volume is adjustable on the machine.

Read more about the industry fume extractor

Documentation

• Catalogs

  • Title	Format	Version	Last change	Language
    PCB Separator MAESTRO 4M	888.0 kB	8.2	23.01.2012	English
    Products for the Electronic Industry	2.0 MB	8.2	23.01.2012	English

• Operation Manuals

  • Title	Format	Version	Last change	Language
    Operator's Manual MAESTRO 4M	1.4 MB	9/11	05.09.2011	English
    Operator's Manual MAESTRO 4M clean	1.8 MB	9/11	11.10.2011	English
    from SN 3732
    Operator's Manual MAESTRO 4M clean	1.8 MB	2/10	11.10.2011	English
    up to SN 3731

• Spare Parts

  • Title	Format	Version	Last change	Language
    Spare Parts List MAESTRO 4M	2.0 MB	10/11	04.10.2011	English
    Electronic diagrams MAESTRO 4M clean	1.2 MB	10/05	17.09.2009	English
    Electronic diagrams MAESTRO 4M	991.5 kB	10/05	17.09.2009	English

• Manuals Accessories

  • Title	Format	Version	Last change	Language
    Conveyor Belt MAESTRO 4M - Operator's Manual	1.1 MB	06/2010	15.12.2011	English
    Industry Dust Extractor - Operator's Manual	459.7 kB	-	10.01.2012	English/Deutsch

• Spare Parts Accessories

  • Title	Format	Version	Last change	Language
    Conveyor Belt MAESTRO 4M - Spare Parts List	3.3 MB	08/2010	15.12.2011	English

You need Adobe Reader to view the PDF files. Some documents require version 7 or above.
   Download current version of Adobe Reader