English
Deutsch
Français
Minilift cablift 1000 / 1500 / 1750
Description
The intelligent Minilift for secure operation, optimisation of process flow and increase in efficiency. Lifting heights 1000 / 1500 / 1750 mm to lift und transport loads up to 125 kg.
Persuasive advantages!
Servo spindle drive
Electronic motor control
38 programmable stop positions
24 volt standard storage battery
Top design
Variants
- 975 - 1475 - 1725 mm Lift height
- 42 - 46 - 50 Tare kg
24 dorsals say "Thank you"!
The Minilift relieves the strain on your back and shoulders by taking over lifting and moving heavy and cumbersome stocks. At the same time productivity and job safety rise which reduces absence due to illness.
- Transporting
- For assembling of machines
- Fit-up aid
- For assembling Transporting of machines
- For emptying containers
-
Smooth approach and slow down
The servo system ensures a measured and smooth operation of the weights.
-
Accurate positioning
Each weight is positioned accurate to the very last millimetre with the clock-pulse generator on the precision spindle.
-
In-built loading unit
The battery can be recharged anywhere with the rollable power cable.
-
Lifting capacity up to 125 kg
Lift, lower, turn, pivot and revolve in standard or customer-specific version.
-
Low-set truck
Solid aluminium frame with polished surface for underriding palettes and storage racks.
-
Easy single-hand control
The remote panel is attached via helix cable, so that the lift can be operated from each side. The up and down movements are controlled via double-acting tact switch.
-
Ten programmable stop positions
If the "up" or "down" buttons are pushed as far as they go the load input stops at the next stop position.
-
Programmable end adjustment
The upper and lower limit can be programmed according to requirements.
-
Ergonomic steering linkage
The solid steering linkage is applicable and steerable for staff of every size.
-
Ball-bearing guide roller
With small turning circle for easy and precise manoeuvring. In case of little space the front guide rollers can be exchanged by fixed rollers.
Technical data
Lift height:
975 - 1475 - 1725 mm
Tare kg:
42 - 46 - 50 kg
Loading capacity:
125/150 - 125/150 - 125 kg
Lifting speed:
100 mm/s (pre-set 100 kg)
Front panel:
up and down button with 10 programmable stopping points
6 program. destinations buttons
1 Enter button
Power cable:
5 m with automatic uncurler
System voltage:
85 - 264 VAC 50 - 60 Hz, 40 W
Duty cycle ED:
30% at full load
Rechargeable battery:
maintenance-free, 24 VDC, 7,2 Ah, loading time max. 8 hours
Degree of protection:
IP41
1. Platform P1 / P2 / P3
The platforms made of stainless steel can be lowered to the floor due to the low-set chassis.
2. Plattform P4 / P5
Easy loading an unloading with the loading rollers in longitudinal and transverse direction. All platforms are made of stainless steel.
3. Platform with rolls R1
For loading and unloading of heavy goods up to 100 kg, equipped with rolls and locking bow.
4. Universal platform
Built the same way as P3. Extras: it can be lift up a container can be slid in the movable clevix.
5. V-Block V1
For cylindrical parts up to 600 mm. Only available with platform P1-3 and universal platform.
6. Turning platform
For magazines or containers which have to be rotated by 180 °- additionally to further processing.
7. Bolt D1
For rolls with cores.
Checklist for cablift
Our products can be custom-made. At short time. Cost-orientated. Customer specific. Please contact us or describe your requirements in the checkliste for the cablift enclosed.
Documentation
Catalogs
-
Title Format Version Last change Language Operating Systems 
812.8 kB
- - - -
-
Operation Manuals
-
Title Format Version Last change Language Operating Systems
906.7 kB
- - - -
2.8 MB
11/04 16.02.2010 
-
2.8 MB
- - - -
-
Spare Parts
-
Title Format Version Last change Language Operating Systems
1.3 MB
01/08 16.02.2010 
-
1.8 MB
01/05 16.02.2010
-
912.8 kB
06/09 16.02.2010
-
1.8 MB
02/05 16.02.2010
-
-