XD4 - the double sided label printer

Integrate cab printers into SAP R/3

Controlling cab label printers quickly and easily from SAP R/3 using SAPScript.

Technical Details

The handling, the electronic, the printheads and the mechanical components are extensively taken from the label printer A4+

1. Big graphic display

White backlight guarantees optimal legibility.

2. Ribbon retainer

Easy and centred insertion of the ribbon with the threepart tightening axles. Due to the imprinted spacer positioning of the ribbon is facilitated.

3. Easy adjustment

The printheads are pressed down with plungers.. One is mounted to the left label margin, the other one is pushed to the right label margin.

4. Material guide

Precise printing due to the material guide located directly behind the print roller. The width is adjusted with a spindle.

5. Peripheral connection

Add-on modules like cutter, external rewinder, present sensor, peel-off adapter and applicators can be easily connected via USB peripheral interface. All peripheral devices are put onto the printer with two gudgeons and fixed with a bolt.

6. Solid, buckling resistant metal chassis

It is made of dye-cast aluminium. All devices are assembled to it.

7. Roll holder

Applicable for core diameters as of 38 mm. (we include adapters for core diamters from 76 mm for
a better winding of the labels). The spring mounted margin stop ensures constant tension while feeding and therefore a highly precise imprint.

8. Only one tool for all maintenance tasks

The Allen key is located ready to hand directly at the printer.

Control

Identical printing data on front and back are automatically printed out in the right position. Not identical data is displayed juxtapositional on the screen and is transferred centre-aligned on both sides of the material. To reduce the wastage after loading labels or prefabricated heat shrink tubes the materials located between gap sensor and lower print head can be labelled as well by designating the material gap

Stand-alone operation

The layout of the labels is created either with the label software or directly on the PC. Label formats, fonts and graphic data, serial data and data base contents are saved on the CF memory card or on the internal IFFS printer memory. Only the variable data is sent to the printer via keyboard or host computer before being printed out.

Precise print with labels from cab

Every job has different requirements.

Integrate cab printers into SAP R/3

Controlling cab label printers quickly and easily from SAP R/3 using SAPScript.

Printhead

Printing method Thermal transfer

Print resolution: 300 dpi

Print speed: 30, 40, 50, 75, 100, 125 mm/s

Print width: 105,6 mm

Material

Paper, cardboard, textile, plastics, PET, PE, PP, PVC, PU, acrylate, PI, tubes: continuous rolls or Leporello fold

Thickness / weight: 0,055 - 1,2 mm / 60 - 300 g/m²

Width: Liner and continuous material 10 -110 mm
Heat shrink tubes 3,5 - 110 mm

Height: up to 2000 mm

Media roll
Total diameter up to 300 mm
Core diameter: 38 - 100 mm
Winding direction: inside or outside

Ribbon

Ink: outside or inside

Roll diameter: up to 72 mm

Core diameter: 25 mm

Ribbon length: variable up to 360 m

Width: up to 114 mm

Dimension of the printer

Hight x Depth x Width: 395 x 554 x 248 mm

Weight: 21 kg

Label sensor

See-through sensor for leading edge of the label or punching marks and end of material.
Reflective sensor from the bottom or optional from the top for printing marks.
Distance from the center to the left 0 - 53 mm

Electronics

Processor high speed 32 Bit ColdFire/Clock rate: 266 MHz

RAM: 64 MB

Memory IFFS MB: 8 Flash

Precise print with labels from cab

Every job has different requirements.

Integrate cab printers into SAP R/3

Controlling cab label printers quickly and easily from SAP R/3 using SAPScript.

1. Cutter CU4 and PCU4

Cutter CU4 and PCU4 The cutter CU4 is used to cut labels, cardboards, textiles or heat shrink-able tubing separately, either in multiple cuts or at the end of the print job.

The perforation cutter is used to cut labels, cardboards, textiles or heat shrink-able tubing separately, either in multiple cuts or at the end of the print job.
Perforation cutter PCU4/2,5, Perforation distance 2.5 mm
Perforation cutter PCU4/10, Perforation distance 10 mm

2. Stacker with Cutter ST4/M

Stacker with Cutter ST4/M

Countinuous material or labels can be cut and piled up with the stacker. The width is adjusted with a spindle. Material with a width from 25-100 mm, a length from 20-150 mm and a height up to 150 mm can be piled up (bigger heights of pile on request).

The storage table is adjusted to the label size. The print job stops when the height of pile is reached.

3. Adapter Ø 100 mm

Adapter Ø 100 mm To keep the bending of the material to a minimum during pilling, cab recommends a broad core diameter.

4. Storage table label width x height for ST4/M

Storage table label width x height for ST4/M

The storage table and protective cover are adjusted to the label size and must be ordered separatly.

5. Memory card

Memory card CompactFlash Type I
Label formats, fonts, texts and graphics can be saved.
Accessible from the printer or from the PC.

6. Compact keyboard

Compact keyboard Connection: USB
USB / No. of key: 86
L x W mm: 282 x 132
Cherry G84-4100

Precise print with labels from cab

Every job has different requirements.

Integrate cab printers into SAP R/3

Controlling cab label printers quickly and easily from SAP R/3 using SAPScript.

Application for

Very slender materials from 3 mm width
Very thick materials up to 1,2 mm thickness
Especially for flat compressed heat shrink tubes with a gap height up to 4,5 mm
Difficult printable surfaces with reduced print speed from 30 mm/sec.

Video: XD4 - Double side printing, cutting and perforation

Other formats:

XD4 - Double side printing, cutting and perforation (WMV, 2,5 MB)
XD4 - Double side printing, cutting and perforation (MPEG-4, 1,6 MB)

Download players:

For Flash: Adobe Flash Player
For WMV: Windows Media Player
For MPEG-4: VLC Player

Precise print with labels from cab

Every job has different requirements.

Integrate cab printers into SAP R/3

Controlling cab label printers quickly and easily from SAP R/3 using SAPScript.