Description

With the Universal Cutting Machine, improve production and lower costs
The FS 100 is an automatic precision cutting machine. The highest quality of cut is attained with the patented cutter system. Resulting from the ease of use and low procurement cost the universal cutter is economicaly viable even for small quantities or samples.

 

 

 

The Advantages at a Glance

• Easy Operation
• Precision Cutting
• Economical

Economical

The FS 100 is cutting with a feed rate of 300 mm/sec. and a material length of 25 mm up to 6.100 pieces per hour. When used for just one hour per month, it pays itself by saving 5 - 10 hours which would be required to cut the same quantity by hand.

Highest Quality of Cut

Self-sharpening blades guarantee more than one million cutting cycles when used correctly. The upper blade can be swung up by hand. A material blockage can easily be cleared. The blades can also be easily exchanged or cleaned. Each blade has two cutting edges. Simply by turning them over, the life of the blades is doubled. Both feed rollers are motor driven to protect the material surface and ensure precise lengths of cut material.

Easy Operation

The Universal Cutter is controlled by a microprocessor, therefore its use is easy and comfortable. A two row Liquid Crystal Display shows all values, conditions and faults. The operator is led step-by-step through the programme. The length of material required, the number of cuts, and the feed rate are requested consecutively. The length of material provided by the test cut can be checked immediately using the built-in tape measure. Any alteration can then be made before starting automatic operation.

Material

The Universal Cutting Machine can cut a wide variety of materials: Flat Cable AWG 22-AWG 32 Round Cable 1 – 6mm, Piping ø up to 30mm. Side up to 2.5mm thick. Piping ø up to 50mm. Side up to 1.5mm thick. Paper, Cardboard up to 250g/m2 Foil and Banded Material.

Technical Data

Breadth of Cut
FS 100 max. 100 mm

Cutter Speed
2 Cuts/Sec.

Feed Rate
50 - 300 mm/Sec.

Cutting Performance
Feed: 150 mm/Sec. / Material Length: 100 mm / Pieces/Hour: 2.400
Feed: 300 mm/Sec. / Material Length: 25 mm / Pieces/Hour: 6.100

Number of Cuts
1 - 999.999

Material Length
10 mm - 100 m

Setting
in 1mm steps

Programming Values
Measuring Unit: mm/Inch
Language: English/French/German

Reel Holder for the FS 100

Enables reels or spools of up to 600 mm in diameter and up to 30 kg in weight to be used.

 

 

 

Unwinder for the FS 100

Provides an additional material feed and is recommended for reels or spools which weigh more than 4 kg. Thereby any variation in the length of cut material will be avoided.

Documentation

• Catalogs

  • Title	Format	Version	Last change	Language
    Universal cutting machine FS 100	513 KB	8.2	10.01.2012	English
    Products for the Electronic Industry	1,76 MB	8.2	16.05.2013	English

• Operation Manuals

  • Title	Format	Version	Last change	Language
    Operator's Manual Universal Cutting Machine FS 100	744 KB	9/11	05.09.2011	English

• Spare Parts

  • Title	Format	Version	Last change	Language
    Spare Parts List Univeral Cutting Machine FS100	1,48 MB	6/10	26.08.2010	English
    Block Diagram Universal Cutting Machine FS 100	299 KB	6/10	23.07.2010	English/Deutsch

• Manuals Accessories

  • Title	Format	Version	Last change	Language
    Unwinder - Operator's Manual	348 KB	04/2010	15.12.2011	English
    Reel Holder - Mounting Instructions	22 KB	2	15.12.2011	English

• Spare Parts Accessories

  • Title	Format	Version	Last change	Language
    Unwinder and Reel Holder - Spare Parts List	826 KB	09/2002	15.12.2011	English